Reinforcer

Item No. CB-RS
0 reviews Write a review
CosBond Reinforcer uses the same reliable adhesive as CosBond Attach & Build, but is backed by a nearly indestructible synthetic material. Tested to 100 lbs. pull-strength, this strong and flexible material is perfect for use in securing seams, hinges, attaching straps, and other places where a
Price
$9.99
excl. tax
View volume discount
This product cannot be ordered at the moment.

Reinforcer for Cosplay

Cosbond Reinforcer Sheets Provide necessary reinforcement to your cosplay creation in areas that need it most including straps, velcro, and hinges.  
  • Single-sided, instant, powerful hold
  • Easy peel-n-stick application
  • No messy glues | No fumes | No drying time
  • 100 lb. pull-strength tested
  • Available in black or white
  • Can be painted 
  • 8.5” x 12” sheet

INSTRUCTIONS FOR USE FOR STRAPS: 

  1. Make sure surfaces to be adhered are smooth and clean
  2. Adhere nylon strap to surface using CosBond Attach & Build — make sure to adhere a length appropriate to the desired amount of hold
  3. Cut CosBond Reinforcer to a size and shape that will fully cover the adhered portion of the strap with a minimum of 1/2” extra on all sides including the end
  4. Peel off the release paper on Reinforcer and press exposed adhesive to cover the strap and the excess to the surface (rub firmly to ensure Reinforcer is firmly adhered to the strap and surface underneath)


INSTRUCTION FOR USE FOR ZIPPERS:

  1. Find the appropriate size and type of zipper for your application 
  2. Make sure surfaces to be adhered are smooth and clean
  3. Adhere the fabric part on one side of your zipper to your material using CosBond Attach & Build
  4. Cut CosBond Reinforcer to a size and shape that will fully cover the adhered portion of the zipper with a minimum of 1/2” extra on all sides including the end
  5. Peel off the release paper on Reinforcer and press exposed adhesive to cover the fabric part of the zipper and the excess to the surface (rub firmly to ensure Reinforcer is firmly adhered to the fabric on the zipper and surface underneath)
  6. Repeat steps 3 through 5 to adhere the opposite side of the zipper to your material


INSTRUCTIONS FOR MAKING HINGES:

  1. Make sure surfaces of the materials to be adhered are smooth and clean
  2. Place the two (2) pieces of your material that you’d like to join with a hinge side by side so the edges to be hinged are touching
  3. Cut CosBond Reinforcer into strips or 1 large piece to form the hinge(s) — for larger pieces, make sure there is enough Reinforcer to ensure the hinge is substantial enough to hold each piece… for smaller pieces like articulating fingers, you will be able to use smaller strips
  4. Peel off the release paper on Reinforcer and press exposed adhesive to the adhesive — approximately 1/2 of the Reinforcer to each of the two (2) pieces — to form a hinge between the two (2) pieces of material (rub firmly to ensure Reinforcer is firmly adhered)

Downloads

How-to-Guide: Using Reinforcer to Create Straps​​​



Related Products

Description
CosBond Reinforcer uses the same reliable adhesive as CosBond Attach & Build, but is backed by a nearly indestructible synthetic material. Tested to 100 lbs. pull-strength, this strong and flexible material is perfect for use in securing seams, hinges, attaching straps, and other places where a tough and strong covering material is required. Reinforcer is Available in black and white and is also paintable so you can blend it into your cosplay. Buy Now
Reviews (0)
There are no reviews yet.

Resources

Material Recommendations
Click Here
How-To Videos
Click to Watch
Questions?
Click Here
Visit our Tutorial Page for how-to lessons using Reinforcer and other CosBond products.        
Click Here
    Loading
    Loading